| NSK 180TFD4001 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Associated eyebolt for handling:M 10; d3:460 mm; d1:406 mm; B3:10 mm; Mass lock nut:24 kg; Associated spanner:TMFN 64-80; G:Tr 360x5; B5:75 mm; d2:393 mm; b:28 mm; h:15 mm; B:58 mm; |
| FAG 509391 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Dynamic Radial Load Rating 40º C1:507000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:1300 rpm; Shielded or Sealed Co2:640000 N; Width Plain C2:475000 N; Basic Static Radial Load Rating 15º Co1:815000 N; D:380.0000 mm; Oil Speed Rating n2:1600 rpm; d:180.000 mm; B:150.00 mm; Fillet Radius ra:3.00 mm; |
| NTN CRTD3401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:50.000 mm; Grease Speed Rating n1:4800 rpm; Basic Dynamic Radial Load Rating C:65000 N; B:40.00 mm; Fillet Radius ra:1.00 mm; D:90.0000 mm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:60000 N; Oil Speed Rating n2:6300 rpm; |
| 526400Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic static load rating C0:17.6 kN; Ew:22 mm; Mass needle roller and cage assembly:0.012 kg; Basic dynamic load rating C:14.2 kN; Fw:16 mm; U:16 mm; Fatigue load limit Pu:2.12 kN; Limiting speed:26000 r/min; Reference speed:22000 r/min; |
| NSK 900TFD1101 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | P180°:240 kN; Pa:25 kN; P120°:205 kN; P55°:480 kN; J:290 mm; J7:37.5 mm; P0°:430 kN; Bearing mean diameter dm:110 mm; H2:35 mm; da:80 mm; S:2.5 mm; N1:22 mm; Mass bearing unit:20 kg; Calculation factor Y2:4.6; Basic dynamic load rating C:236 kN; N:28 mm; L:345 mm; Attachment bolt diameter G:20 mm; H1:100 mm; Limiting speed:2300 r/min; |
| 545991 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r3,4 min.:5 mm; F:369 mm; r1,2 min.:5 mm; Calculation factor kr:380; Basic dynamic load rating C:2550 kN; B:250 mm; C:250 mm; D1 ≈:411 mm; Fatigue load limit Pu:550 kN; D:450 mm; d:340 mm; Basic static load rating C0:6000 kN; Mass bearing:115 kg; b:13.9 mm; K:7.5 mm; Design variant/feature:BC4.10/W33WI; |
| FAG 513828 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Labyrinth ring:2 x LOR 52; End plug (suffix Y):EPR 9; P180°:33.8 kN; S:4.763 mm; Cap bolt:2 x 5/8-11 UNC; Mass pillow block:24.5 kg; Ca:45.796 mm; Max. speed for PosiTrac Plus seal:1950 r/min; Stabilizing ring:SR-17-14; P150°:28.5 kN; ba:35.719 mm; N1:19.05 mm; Cap bolt recommended tightening torque:298.3 N·m; J1:53.975 mm; A1:88.9 mm; Initial grease fill:110.56 g; PG:1/8 NPT; L:330.2 mm; |
| NSK 200TFD2801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da min.:1221 mm; rb max.:7.5 mm; B:710 mm; dk:1312 mm; Design (sliding contact surface combination):Steel/PTFE FRP; Mass plain bearing:4426 kg; Lubricant:Maintenance free &nd; α:2 °; C:670 mm; Material constant KM:1055; Basic dynamic load rating C:63000 kN; M:15 mm; b:40 mm; b1:40 mm; d:1000 mm; ra max.:4 mm; D:1450 mm; da min.:1045 mm; Specific dynamic load factor K:80 N/mm²; r2 min.:7.5 mm; |
| 2THR644713 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Grease:15 000 min-1; rs:1 mm; Pu:0.298 kN; Bearing designation:62204 ; d:20 mm; Weight:0.13 kg; Static (Cor):6.553 kN; ra:1 max; Oil:18 000 min-1; D:47 mm; da:25 min; B:18 mm; Dynamic (Cr):12.774 kN; Da:42 max; |
| FAG 532584 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:28 mm; d:40 mm; G:M 42x3; Mass rod end:1.9 kg; C1 max.:24 mm; Basic static load rating C0:140 kN; Basic dynamic load rating C:150 kN; Specific dynamic load factor K:150 N/mm²; d2 max.:94 mm; h:145 mm; r1 min.:0.6 mm; dk:53 mm; l7 min.:46 mm; l2 max.:194 mm; Material constant KM:330; l1 min.:76 mm; α:6 °; |
| No. | Brand | G | C | N | a | S | J | A | L |
| 2THR50381 | - | - | - | - | - | - | - | - | - |
| FAG 522837 | - | - | - | - | - | - | - | - | - |
| 560880Y | - | - | - | - | - | 4.763 mm | - | - | - |
| NTN CRTD3401 | - | - | - | - | - | - | - | - | - |
| 547584 | - | - | - | - | - | - | - | 35.7 mm | 117.5 mm |
| NSK 350TFD5401 | - | - | - | - | - | - | - | - | 393.7 mm |
| FAG 57332 | - | - | 43.5 mm | - | 48.562 mm | - | - | - | - |
| 522837 | - | - | - | - | - | - | - | - | 387.35 mm |
| NTN CRTD7012 | - | - | - | - | - | 4.763 mm | - | - | 349.25 mm |
| NSK 120TFD2501 | - | - | - | - | - | - | - | - | - |
| FAG 524194 | - | - | - | - | - | - | - | - | - |
| 548285 | - | - | - | - | - | - | - | - | - |
| SKF 351182C | - | - | - | - | - | - | - | - | - |
| 829736 | - | - | - | - | - | - | - | - | - |
| SKF BFDB353200/HA3 | - | - | - | - | - | - | - | - | - |
| 829744 | - | - | - | - | - | - | - | - | - |
| FAG 524902 | - | - | - | - | - | - | - | - | - |
| NSK 250TFD3801 | - | - | - | - | - | - | - | - | - |
| FAG 5634 | - | - | - | 42 mm | - | - | - | 310 mm | 700 mm |
| FAG 515805 | - | - | - | - | - | - | - | - | - |
SKF 351019C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS Video
Thrust roller bearing 351019-C-SKF - 220x300x96 mm
Thrust roller bearing 351019-C-SKF , dim : Ø int. 220 x Ø ext. 300 x th. 96 mm. SAME DAY SHIPPING. The specialist at your service for over 10 years
Axial-radial cylindrical roller bearings
Super-precision axial-radial cylindrical roller bearings (fig. 1) are commonly used to support rotary tables, indexing heads and multi-spindle heads on machining
SKF 351019 C bearings
We, Hong Kong Ericbearing Co,Ltd, as one of the largest exporters and distributors of SKF 351019 C bearing in China, are committed to customer satisfaction of
SKF | 351019 C | Thrust Roller Bearing | Applied
Shop SKF 351019 C at Applied.com, which includes; Thrust Roller Bearing, 220 mm ID, 300 mm OD, 96 mm Width, Tapered Bore
SKF 351019 C - Ball Bearings
SKF 351019 C Bearing Details： Bearing Name 351019 C New Model 351019C Old Model bearing product Model 351019C Category Thrust Roller Bearings
351019C SKF • ABF Store
351019C SKF available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8 languages
SKF 351019C 220x300x96mm Bearing |
Jan 30, 2017 - Basic Parameters. Bearing Number, 351019C. Type, Taper Roller Thrust Bearing. Boundary Dimensions (mm). d, 220. D, 300. B, 96