| FAG 515196 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | w:70 mm; l3 min.:70 mm; Specific dynamic load factor K:100 N/mm²; C1 max.:39 mm; G:M 52x3; d4 ≈:82 mm; l4 max.:246 mm; Material constant KM:330; l7 min.:70 mm; dk:80 mm; Mass rod end:7.1 kg; d:60 mm; h1:175 mm; d2 max.:137 mm; l5 ≈:35 mm; α:6 °; r1 min.:1 mm; Basic dynamic load rating C:245 kN; B:44 mm; Basic static load rating C0:400 kN; |
| FAG 534038 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Pa:11.6 kN; da:82.55 mm; Housing:SAF 618; Cap bolt:2 x 3/4-10 UNC; J1:57.15 mm; PG:1/4 NPT; Mass pillow block:41.1 kg; P90°:77 kN; A1:111.125 mm; P60°:128 kN; J max.:342.9 mm; N1:22.225 mm; H1:120.65 mm; P120°:48.9 kN; P180°:54.3 kN; Labyrinth ring:2 x LOR 189; R2:28.575 mm; End plug (suffix Y):EPR 11; Initial grease fill:481.95 g; Cap bolt recommended tightening torque:515.2 N·m; |
| 590118Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Radial Load Rating-Dynamic DC:19500 N; Width - Inner Ring B1:19.00 mm; D:62.0000 mm; Width - Outer Ring B0:16.0 mm; Accessories:8000 One Seal; Basic Interchange BCA:8506; Basic Interchange NDH:8506; Basic Interchange FAF:206KL; Width - Overall B:20.0 mm; Old MRC Bearing Number:206FS; d:30.000 mm; Basic Radial Load Rating-Static SCO:11400 N; Fillet Radius ra:1.00 mm; Speed Rating-Single and Double Sealed Grease SDG:7500 rpm; |
| NSK 470TFD7201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | l7 min.:40 mm; Specific dynamic load factor K:150 N/mm²; w:50 mm; G:M 42x3; Basic dynamic load rating C:150 kN; dk:53 mm; h1:145 mm; Basic static load rating C0:166 kN; d2 max.:94 mm; l4 max.:194 mm; Mass rod end:2.3 kg; d:40 mm; d4 ≈:58 mm; C1 max.:24 mm; r1 min.:0.6 mm; l5 ≈:25 mm; B:28 mm; l3 min.:65 mm; Material constant KM:330; α:6 °; |
| SKF 350980C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Static axial stiffness, preload class B:261 N/µm; Calculation factor (back-to-back, face-to-face) X2:0.67; C3:2.8 mm; da min.:74.6 mm; Attainable speed for oil-air lubrication:22000 r/min; dn:81.7 mm; Preload class C GC:800 N; Static axial stiffness, preload class C:348 N/µm; b:2 mm; r1,2 min.:1 mm; Calculation factor f2B:1.07; Reference grease quantity Gref:4.5 cm³; r3,4 min.:0.3 mm; |
| FAG 547482 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | J1:69.85 mm; Stabilizing ring:SR-24-20; L:419.1 mm; End plug (suffix Y):EPR 12; P90°:111 kN; da:85.725 mm; P150°:66.7 kN; Da:215.001 mm; Appropriate attachment bolt size G:0.75 in; H1:133.35 mm; Labyrinth ring:2 x LOR 101; Mass pillow block:51.3 kg; R1:79.375 mm; J min.:336.55 mm; PG:1/4 NPT; Housing:SAF 620; P120°:72.5 kN; P60°:185 kN; A2:187.325 mm; N1:22.225 mm; |
| SKF 350916D DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:34.00 mm; Oil Speed Rating n2:4000 rpm; Basic Dynamic Radial Load Rating C:153000 N; Fillet Radius rb:1.00 mm; D:180.0000 mm; Grease Speed Rating n1:3400 rpm; d:100.000 mm; Basic Static Radial Load Rating Co:143000 N; Fillet Radius ra:2.00 mm; |
| SKF 350981C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:215.0000 mm; Basic Static Radial Load Rating Co:212000 N; d:100.000 mm; B:47.00 mm; Basic Dynamic Radial Load Rating C:194000 N; Fillet Radius ra:2.50 mm; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:2500 rpm; Oil Speed Rating Open/Shielded n2:3000 rpm; |
| NTN CRTD8801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r, r1,2 min.:0.3 mm; B:10 mm; F:10 mm; d:6 mm; Mass inner ring:0.0037 kg; |
| 540162 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Fillet Radius ra:3.00 mm; D:380.0000 mm; Basic Static Radial Load Rating Co:610000 N; B:61.00 mm; Oil Speed Rating n2:1900 rpm; d:210.000 mm; Basic Dynamic Radial Load Rating C:436000 N; Grease Speed Rating n1:1600 rpm; Fillet Radius rb:1.00 mm; |