| NSK 420TFD6201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ba:42.069 mm; Ca:62.789 mm; P60°:149 kN; Cap bolt recommended tightening torque:203.4 N·m; A2:165.1 mm; Bearing limiting speed:4300 r/min; P90°:89 kN; Labyrinth ring:2 x LOR 557; h:45.244 mm; N1:22.225 mm; P150°:50.7 kN; J1:69.85 mm; H2:50.8 mm; Housing:SAF 522; R1:67.866 mm; P120°:55.6 kN; Stabilizing ring:2 x SR-1522; Pa:12.5 kN; Appropriate attachment bolt size G:0.75 in; |
| 526400Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic static load rating C0:17.6 kN; Ew:22 mm; Mass needle roller and cage assembly:0.012 kg; Basic dynamic load rating C:14.2 kN; Fw:16 mm; U:16 mm; Fatigue load limit Pu:2.12 kN; Limiting speed:26000 r/min; Reference speed:22000 r/min; |
| 560880Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da:250 mm; Cap bolt, SAE grade:8; RG:3/4 NPT; Stabilizing ring:SR-28-0; H2:60.325 mm; S:4.763 mm; R2:38.1 mm; PosiTrac Plus contact element (db shaft position):B10724-144; Mass pillow block:89.8 kg; Max. speed for PosiTrac Plus seal:925 r/min; Ca:77.8 mm; A1:149.225 mm; R1:87.313 mm; Eye bolt:3/8-16 UNC; Labyrinth ring (db shaft position):LOR 144; h:51.594 mm; End plug (suffix Y):EPR 16; P120°:116 kN; |
| 829788 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Hydraulic nut:HMV 68E; G3:9 mm; Mass adapter sleeve assembly:25 kg; G2:M 6; B:45 mm; A:4 mm; d1:320 mm; B5:58 mm; G:Tr 340x5; d3:400 mm; B1:144 mm; d:340 mm; |
| 509352 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass rod end:0.5 kg; l3 min.:33 mm; dk:38.1 mm; d4 max.:40 mm; w:32 mm; Basic dynamic load rating C:38 kN; d:22 mm; Specific dynamic load factor K:50 N/mm²; α:15 °; r1 min.:0.3 mm; Material constant KM:330; d2 max.:55 mm; G:M 22x1.5; l4 max.:112 mm; B:28 mm; C1 max.:21 mm; Basic static load rating C0:45 kN; l7 min.:27 mm; h1:84 mm; l5 ≈:12 mm; |
| 829954 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Recommended diameter for attachment bolts, mm G:10 mm; H:138 mm; H1:52.4 mm; Basic static load rating C0:11.2 kN; Thread grub screw G2:1/4-28 UNF; Fatigue load limit Pu:0.475 kN; J1:31.8 mm; s1:22.2 mm; d:31.75 mm; Hexagonal key size for grub screw N:3.175 mm; L1:76 mm; Basic dynamic load rating C:16.3 kN; A1:13.3 mm; N:10.7 mm; L:83 mm; J:47.6 mm; Recommended diameter for attachment bolts, inch G:0.375 in; |
| FAG 530739 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da max.:9 mm; da min.:6.9 mm; B:2.5 mm; Mass bearing:0.0006 kg; r1,2 min.:0.15 mm; Calculation factor kr:0.015; d1 ≈:7.04 mm; Reference speed:120000 r/min; D1 ≈:8.9 mm; Limiting speed:75000 r/min; Fatigue load limit Pu:0.005 kN; D:10 mm; Basic dynamic load rating C:0.286 kN; d:6 mm; Calculation factor f0:7.9; Basic static load rating C0:0.112 kN; ra max.:0.15 mm; |
| FAG 522837 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Grease Speed Rating n1:3800 rpm; D:110.0000 mm; Fillet Radius ra:1.50 mm; B:36.50 mm; Basic Static Radial Load Rating Co:88000 N; Oil Speed Rating n2:5000 rpm; Basic Dynamic Radial Load Rating C:78100 N; Sealed Speed Rating n3:3800 rpm; Accessories:Shield & Seal & Snap; d:60.000 mm; |
| NTN CRTD3618 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Grease Speed Rating Open/Shielded n1:19000 rpm; B:12.00 mm; Sealed Speed Rating n3:14000 rpm; Basic Static Radial Load Rating Co:4150 N; Basic Dynamic Radial Load Rating C:9750 N; D:37.0000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:24000 rpm; d:12.000 mm; Accessories:Two Seals; Grease Speed Rating n1:19000 rpm; Oil Speed Rating n2:24000 rpm; |
| 546680Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D1:32 mm; B1:4 mm; h:18 mm; Specific static load factor K0:45 N/mm²; D:25 mm; B:12 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; Tolerance housing:H7; α:105 °; Tolerance shaft:e7; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; Mass bushing:0.039 kg; d:17 mm; Specific dynamic load factor K:25 N/mm²; a:3 mm; |