| 829244 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Grease Speed Rating n1:3800 rpm; B:52.40 mm; Sealed Speed Rating n3:3800 rpm; Oil Speed Rating n2:5000 rpm; Accessories:One Shield & Snap-Ri; Basic Static Radial Load Rating Co:81500 N; Basic Dynamic Radial Load Rating C:106000 N; d:55.000 mm; Fillet Radius ra:2.00 mm; D:120.0000 mm; |
| 520560Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D1 ≈:46.8 mm; Calculation factor f0:14.7; Mass bearing:0.12 kg; Da max.:50.4 mm; d1 ≈:38.2 mm; Basic static load rating C0:8.3 kN; Limiting speed:19000 r/min; Calculation factor kr:0.025; ra max.:0.3 mm; r1,2 min.:1 mm; Basic dynamic load rating C:13.8 kN; da min.:34.6 mm; d:30 mm; D:55 mm; Fatigue load limit Pu:0.355 kN; B:13 mm; Reference speed:30000 r/min; |
| FAG 544025 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | S:4.763 mm; Initial grease fill:2749.95 g; Cap bolt recommended tightening torque:400 N·m; P150°:145 kN; Mass pillow block:283 kg; R1:130.175 mm; Da:399.999 mm; PG:1/4 NPT; P90°:254 kN; ba:99.219 mm; A2:371.475 mm; P180°:173 kN; Cap bolt, SAE grade:5; J min.:628.65 mm; R2:46.831 mm; Pa:75.6 kN; H2:95.25 mm; L:831.85 mm; H:474.663 mm; Ca:141.808 mm; |
| 528876 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D1 ≈:1173 mm; Mass bearing:1150 kg; d2 ≈:1005 mm; Da min.:1126 mm; Reference speed:300 r/min; s1 max.:24.8 mm; D:1280 mm; r1,2 min.:7.5 mm; Basic dynamic load rating C:12700 kN; Da max.:1252 mm; Operating clearance factor k2:0.1; Ca min.:9 mm; Fatigue load limit Pu:1530 kN; ra max.:6 mm; B:280 mm; Basic static load rating C0:26500 kN; d:900 mm; Limiting speed:400 r/min; |
| 544025 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | DN:6.5 mm; d:50.8 mm; Recommended tightening torque for grub screw:16.5 N·m; GN:1/4-28 SAE-LT; Fatigue load limit Pu:1.25 kN; J6:154 mm; H:216 mm; J:184 mm; N:18 mm; R1:31.5 mm; Thread grub screw G2:3/8-24 UNF; Recommended diameter for attachment bolts, inch G:0.625 in; A5:29.5 mm; Housing material:Cast iron; J7:18 mm; Recommended diameter for attachment bolts, mm G:16 mm; Basic dynamic load rating C:43.6 kN; |
| 829994 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | P150°:85.9 kN; Cap bolt:4 x 1-8 UNC; Labyrinth ring (dc shaft position):LOR 127; Ca:77.8 mm; ba:61.119 mm; Labyrinth ring (db shaft position):LOR 144; A1:149.225 mm; H:305.594 mm; H2:60.325 mm; Mass pillow block:67.6 kg; db:158.75 mm; Cap bolt recommended tightening torque:400 N·m; J1:85.725 mm; PosiTrac Plus contact element (dc shaft position):B10724-125; P180°:103 kN; Eye bolt:3/8-16 UNC; |
| 550760Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Static Radial Load Rating Co:156000 N; Sealed Speed Rating n3:2400 rpm; Oil Speed Rating n2:3400 rpm; Accessories:No Shield, no Seal,; B:68.30 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:182000 N; D:170.0000 mm; Grease Speed Rating n1:2400 rpm; d:80.000 mm; |
| FAG 515196 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | w:70 mm; l3 min.:70 mm; Specific dynamic load factor K:100 N/mm²; C1 max.:39 mm; G:M 52x3; d4 ≈:82 mm; l4 max.:246 mm; Material constant KM:330; l7 min.:70 mm; dk:80 mm; Mass rod end:7.1 kg; d:60 mm; h1:175 mm; d2 max.:137 mm; l5 ≈:35 mm; α:6 °; r1 min.:1 mm; Basic dynamic load rating C:245 kN; B:44 mm; Basic static load rating C0:400 kN; |
| NTN CRTD5317 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r1 max.:0.4 mm; r1,2 min.:0.1 mm; Lw:13.8 mm; Dw:1.5 mm; r2 max.:0.6 mm; Mass needle roller:0.191 g; |
| 52372 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Max. speed for Taconite seal:775 r/min; PG:1/4 NPT; ba:38.894 mm; dc:80.975 mm; A1:111.125 mm; P60°:94.3 kN; Pa:24.5 kN; H2:44.45 mm; Housing:SAF 317; J max.:333.375 mm; R1:65.088 mm; RG:3/8 NPT; Da:180 mm; N1:25.4 mm; A2:235.744 mm; Taconite seal (db shaft position):TER 109; H1:114.3 mm; P150°:32 kN; P90°:56.5 kN; Stabilizing ring:2 x SR-1617; |